Toshiba Speaker System SBX4250 User Manual

Sound Bar Speaker System  
User’s Guide:  
SBX4250KN  
If you need assistance:  
Toshiba’s Support Web site support.toshiba.com  
Call Toshiba Customer Support Center:  
Within the United States at (800) 631-3811  
Outside the United States at (949) 583-3050  
From Canada at (800) 268-3404  
For more information see “Troubleshooting” on page 17 in this guide.  
Owner’s Record  
The model number and serial number are on the back and underside of your Sound  
Bar. Record these numbers in the spaces below. Refer to these numbers whenever  
you communicate with your Toshiba dealer about this Sound Bar.  
Model name____________________________  
Serial number___________________________  
 
SBX4250KN_IB_V1_R13.indd  
1
2012/6/26 14:21:43  
3
Safety Precautions  
The lightning flash with an arrowhead symbol, within the  
equilateral triangle, is intended to alert the user to the presence  
of uninsulated “dangerous voltage” within the product’s  
enclosure that may be of sufficient magnitude to constitute a  
risk of electric shock to persons.  
The exclamation point within the equilateral triangle is intended  
to alert the user to the presence of important operating and  
maintenance (servicing) instructions in this User’s Guide.  
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR  
MOISTURE. DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN THE CABINET.  
REFER SERVICING TO QUALIFIED PERSONNEL ONLY.  
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT OF AC POWER UTLET, THEN FULLY  
INSERT.  
CHANGES OR MODIFICATIONS MADE TO THIS EQUIPMENT, NOT EXPRESSLY APPROVED BY TOSHIBA, OR PARTIES  
AUTHORIZED BY TOSHIBA, COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.  
Warnings:  
To ensure proper use of this product, please read this User’s  
Guide carefully and retain for future reference. Should the unit  
require maintenance, contact an authorized service location. Use  
of controls or adjustments or performance of procedures other  
than those specified herein may result in hazardous radiation  
exposure.  
The mains plug is used as disconnect device and it should  
remain readily operable during intended used. In order to  
disconnect the apparatus from the mains completely, the main  
plug should be disconnected from the mains socket outlet  
completely.  
The symbol for Class II  
(Double lnsulation)  
Important Safety Instructions  
1. Read these instructions.  
10. Protect the power cord from being walked on or pinched  
particularly at plugs, convenience receptacles, and the point  
where they exit from the apparatus.  
11. Only use attachments/accessories specified by the  
manufacturer.  
12. Unplug this apparatus during lightning storms or when  
unused for long periods of time.  
13. Refer all servicing to qualified service personnel. Servicing is  
required when the apparatus has been damaged in any way,  
such as the power-supply cord or plug is damaged, liquid has  
been spilled or objects have fallen into the apparatus, the  
apparatus has been exposed to rain or moisture, does not  
operate normally, or has been dropped.  
14. Do not overload wall outlets; extension cords, or integral  
convenience receptacles as this can result in a risk of fire  
or electric shock.  
2. Keep these instructions.  
3. Heed all warnings.  
4. Follow all instructions.  
5. Do not use this apparatus near water.  
6. Clean only with a dry cloth.  
7. Do not block any of the ventilation openings. Install in  
accordance with the manufacturer’s instructions.  
8. Do not install near any heat sources such as radiators, heat  
registers, stoves, or other apparatus (including amplifiers)  
that produce heat.  
9. Do not defeat the safety purpose of the polarized or  
grounding-type plug. A polarized plug has two blades with  
one wider than the other. A grounding type plug has two  
blades and  
a
third grounding prong. The wide blade or  
the third prong is provided for your safety. If the provided  
plug does not fit into your outlet, consult an electrician for  
replacement of the obsolete outlet.  
15. Never expose the apparatus to dripping or splashing or place  
items such as vases, aquariums, any other item filled with  
liquid, or candles on top of the unit.  
 
SBX4250KN_IB_V1_R13.indd  
3
2012/6/26 14:21:44  
4
Additional Safety Instructions  
16. Do not place anything on top of this unit.  
17. Do not place the apparatus on amplifiers or equipment that  
may produce heat.  
18. Never block or cover the slots or openings in the unit. Never  
place the unit:  
19. If the apparatus should emit smoke or an unusual odor,  
immediately disconnect the power cord from the wall outlet.  
Wait until the smoke or smell stops, then ask your dealer for a  
check and repair. Neglecting to do so may cause fire.  
20. During lighting, do not touch the connecting cables or the  
apparatus.  
on a bed, sofa, rug or similar surface;  
too close to drapes, curtains, or walls; or  
in a confined space such as a bookcase, built-in cabinet, or  
any other place with poor ventilation.  
21. Warning: To prevent spread of fire, keep candles or other  
open flames away from this product at all times.  
The slots and openings are provided to protect the unit from  
overheating and to help maintain reliable operation.  
USA  
Bluetooth® Wireless Technology and Your Health  
The products with Bluetooth® wireless technology, like other  
radio devices, emit radio frequency electromagnetic energy.  
The level of energy emitted by devices with Bluetooth® wireless  
technology however is much less than the  
Federal Communications Commission Statement  
FCC Compliance Statement  
This device complies with Part 15 of the FCC Rules. Operation  
is subject to the following two conditions: (1) This device may  
not cause harmful interference, and (2) This device must accept  
any interference received, including interference that may cause  
undesired operation.  
electromagnetic energy emitted by wireless devices such as  
mobile phones.  
Because products with Bluetooth® wireless technology operate  
within the guidelines found in radio frequency safety standards  
and recommendations, TOSHIBA believes Bluetooth® wireless  
technology is safe for use by consumers.  
Interference  
This equipment has been tested and found to comply with the  
limits for a Class B digital device, pursuant to Part 15 of the  
FCC Rules. These limits are designed to provide reasonable  
These standards and recommendations reflect the consensus  
of the scientific community and result from deliberations of  
panels and committees of scientists  
who continually review and interpret the extensive research  
literature.  
protection against harmful interference in  
a
residential  
installation. This equipment generates, uses, and can radiate  
radio frequency energy and, if not installed and used in  
accordance with the instructions, may cause harmful interference  
to radio communications. However, there is no guarantee that  
In some situations or environments, the use of Bluetooth®  
wireless technology may be restricted by the proprietor of the  
building or responsible representatives of the organization.  
These situations may, for example, include in any other  
environment where the risk of interference to other devices or  
services is perceived or identified as harmful.  
If you are uncertain of the policy that applies on the use of  
wireless devices in a specific organization or environment (e.g.  
airports), you are encouraged to ask for authorization to use  
the device with Bluetooth® wireless technology prior to turning  
on the equipment.  
interference will not occur in  
a
particular installation. If this  
equipment does cause harmful interference to radio or television  
reception, which can be determined by turning the equipment off  
and on, the user is encouraged to try to correct the interference  
by one of the following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from  
that to which the receiver is connected.  
Consult the dealer or an experienced radio/TV technician for  
help.  
 
SBX4250KN_IB_V1_R13.indd  
4
2012/6/26 14:21:44  
5
Precautions  
On Safety  
On Recycling  
Do not handle the AC power cord with wet hands.  
When connecting or disconnecting the AC power cord, grip the  
plug and not the cord itself. Pulling the cord may damage it and  
create a hazard.  
This unit’s packaging materials are recyclable and can be  
reused. Please dispose of any materials in accordance with your  
local recycling regulations.  
Batteries should never be thrown away or incinerated but  
disposed of in accordance with your local regulations concerning  
chemical wastes.  
When you are not going to use the unit for a long period of time,  
disconnect the AC power cord.  
Copyright  
This guide is copyrighted by Toshiba America Information  
Systems, Inc. with all rights reserved. Under the copyright laws,  
this guide cannot be reproduced in any form without the prior  
written permission of Toshiba. No patent liability is assumed,  
however, with respect to the use of the information contained  
herein.  
©2012 by Toshiba America Information Systems, Inc. All rights  
reserved.  
Notice  
The information contained in this manual, including but not limited to any product specifications, is subject to change without notice.  
TOSHIBA CORPORATION AND TOSHIBA AMERICA INFORMATION SYSTEMS, INC. (TOSHIBA) PROVIDES NO WARRANTY  
WITH REGARD TO THIS MANUAL OR ANY OTHER INFORMATION CONTAINED HEREIN AND HEREBY EXPRESSLY  
DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE WITH  
REGARD TO ANY OF THE FOREGOING. TOSHIBA ASSUMES NO LIABILITY FOR ANY DAMAGES INCURRED DIRECTLY  
OR INDIRECTLY FROM ANY TECHNICAL OR TYPOGRAPHICAL ERRORS OR OMISSIONS CONTAINED HEREIN OR FOR  
DISCREPANCIES BETWEEN  
THE PRODUCT AND THE MANUAL. IN NO EVENT SHALL TOSHIBA BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL,  
SPECIAL, OR EXEMPLARY DAMAGES, WHETHER BASED ON TORT, CONTRACT OR OTHERWISE, ARISING OUT OF OR IN  
CONNECTION WITH THIS MANUAL OR ANY OTHER INFORMATION CONTAINED HEREIN OR THE USE THEREOF.  
Trademarks  
The Bluetooth® word mark and logos  
are registered trademarks owned by  
Bluetooth SIG, Inc. and any use of such  
marks by Toshiba Corporation is under  
license.  
is  
a
trademark of SRS Labs, Inc.  
TruSurround HD technology is incorporated  
under license from SRS Labs, Inc.  
SRS TruSurround HD® creates an  
immersive, feature-rich surround sound  
experience from two speakers, complete  
with rich bass, high frequency detail and  
clear dialog.  
Manufactured under license from Dolby  
Laboratories. Dolby, and the double-D  
symbol are trademarks of Dolby  
Laboratories.  
All other brand and product names are trademarks or registered  
trademarks of their respective companies.  
HDMI, the HDMI logo, and High-Definition  
Multimedia Interface are trademarks or  
registered trademarks of HDMI Licensing  
LLC in the United States and other  
countries.  
 
SBX4250KN_IB_V1_R13.indd  
5
2012/6/26 14:21:44  
6
Introduction  
Safety icons  
This guide contains safety instructions that must be observed to avoid potential hazards that could  
result in personal injuries, damage to your equipment, or loss of data. These safety cautions have  
been classified according to the seriousness of the risk, and icons highlight these instructions as  
follows:  
Indicates an imminently hazardous situation which, if not avoided, will result in  
death or serious injury.  
Indicates a potentially hazardous situation which, if not avoided, could result in  
death or serious injury.  
Indicates a potentially hazardous situation which, if not avoided, may result in minor  
or moderate injury.  
Indicates a potentially hazardous situation which, if not avoided, may result in  
property damage.  
Provides important information.  
Supplied Accessories  
Remote Control (SE-R0429) with Batteries (AAA x 2)  
User’s Guide (this manual)  
Quick Start Guide  
Wall Mounting template  
Switching power supply (AC Adapter)  
Warranty Card  
Stop Return Sheet  
 
SBX4250KN_IB_V1_R13.indd  
6
2012/6/26 14:21:44  
7
Sound Bar front panel  
Sound Bar speaker system controls  
(Sample Illustration) Front panel controls  
Item: Description:  
Function:  
1
2
3
4
5
Remote Sensor  
VOLUME button  
Press to adjust the volume level.  
BASS VOLUME button  
Press to adjust the bass volume level.  
SURROUND MODE button Press to select the Stereo/SRS TruSurround HD/SRS TruBass.  
INPUT button  
Press to switch between HDMI® 1/2 (HDMI® IN), ARC  
(HDMI® ARC) , BT (Bluetooth®), OPT 1/2 (OPTICAL IN),  
AUX (AUX IN) or LINE-IN.  
6
7
STANDBY button  
Standby Indicator  
Press to turn on the unit or place it into standby mode.  
Note : To completely turn the unit off, you must unplug the  
switching power supply (AC Adapter).  
Indicates whether the unit is ON or in STANDBY (OFF) mode.  
Light On: The unit is in STANDBY.  
Light Off: The unit is turned ON.  
 
SBX4250KN_IB_V1_R13.indd  
7
2012/6/26 14:21:44  
8
Sound Bar back panel  
8
9
10  
12  
13  
11  
(Sample Illustration) Back panel connections  
Item: Description:  
Functions:  
8
OPTICAL IN jack (1) & (2)  
Connects the optical audio input to another device, see  
“Connecting to an Audio System” on page 14.  
9
AUX IN jack (L / R)  
Connects other AV devices through the AUX IN jack, see  
“Connect audio through an analog audio cable” section on  
page 14.  
10  
LINE IN jack  
Connects other AV devices through the LINE IN jack, see  
“Connect audio through an analog audio cable” section on  
page 15.  
11  
12  
DC IN jack  
Connects to the power supply, see “Connecting to a switching  
power supply (AC Adapter)” on page 15.  
HDMI® IN jack (1) & (2)  
HDMI® (High-Definition Multimedia Interface) cable  
connects to devices that have an HDMI® output. See  
Connecting to a compatible device section on page 13.  
13  
HDMI® OUT jack  
Audio Return Channel (ARC) enables the audio signal of  
the TV to be sent to the Sound Bar via the HDMI® cable.  
See “Connecting to a TV using an HDMI® (ARC) cable” on  
page 13.  
 
SBX4250KN_IB_V1_R13.indd  
8
2012/6/26 14:21:44  
9
Subwoofer  
14  
15  
16  
17  
18  
(Sample Illustration) Subwoofer connections  
Item:  
14  
Description:  
Functions:  
Bass port  
15  
Subwoofer Speaker  
16  
WIRELESS LINK button Press to pair the subwoofer with the Sound Bar.  
WIRELESS LINK indicator The indicator is red when the wireless link is activated.  
17  
18  
POWER switch  
Switch to turn ON/OFF the subwoofer.  
Power cord  
Connects to a standard AC outlet to supply power to the  
subwoofer.  
SRS TruSurround HD™  
SRS TruSurround HD™ delivers  
immersive and natural surround sound  
without the need to add cumbersome  
rear speakers. TruSurround HD also  
improves vocal clarity to ensure dialog  
is always clearly understood even  
when challenged by loud sound effects  
common in today’s soundtracks.  
Additionally, TruSurround HD uses  
specialized technologies to provide  
rich enveloping bass up to an octave  
beyond what the speakers are  
normally capable of producing while  
adding crisp, clear high-frequency  
detail all together providing  
a
truly  
compelling listening experience.  
 
SBX4250KN_IB_V1_R13.indd  
9
2012/6/26 14:21:44  
10  
Remote control  
Item: Description:  
Operation:  
1
2
7
8
1
MUTE  
Press to turn the sound off.  
Press again to cancel.  
2
3
CEC  
Press to turn the HDMI® CEC on/off.  
3
VOLUME  
PRE/NEXT  
Press to adjust the volume level.  
Press to go to the last track or advance  
to the next track in Bluetooth® mode.  
4
5
9
10  
PLAY/PAUSE Press to play/pause the track in  
Bluetooth® mode.  
6
4
EQ  
Press to select the sound setting.  
(Flat/Rock/Pop/Jazz/Classic/Movie)  
NOTE: When in stereo mode, use EQ to  
select your settings.  
(Sample Illustration)  
Remote control  
5
6
BASS  
SUB  
Press to adjust the bass volume level.  
Press to adjust the subwoofer volume  
level.  
7
8
POWER  
INPUT  
Press to turn the Sound Bar ON/OFF.  
Press to select the source.  
(HDMI® 1/2 (HDMI® IN), ARC (HDMI®  
ARC), BT (Bluetooth®), OPT 1/2  
(OPTICAL IN), AUX (AUX IN), LINE-IN)  
9
SRS  
Press to select the Stereo  
TruSurround HD / SRS TruBass.  
/
SRS  
10  
TREBLE  
Press to adjust the treble volume level.  
 
SBX4250KN_IB_V1_R13.indd 10  
2012/6/26 14:21:44  
11  
Installing the batteries  
Install the batteries (AAAx2), matching the polarity indicated inside the battery compartment of  
the remote control.  
1
Open the battery cover.  
(Sample Illustration) Remote control  
- Opening the battery cover  
2
Insert batteries.  
Make sure to match the polarity marks (+ / -) on the batteries to the marks indicated in the  
battery compartment.  
(Sample Illustration) Remote control  
- inserting the batteries  
3
Replace the battery cover.  
Never throw batteries in a fire. Doing so may cause the batteries to explode.  
Do not mix different battery types or combine used batteries with new ones.  
If the remote control does not operate correctly, or if the operating range is reduced,  
replace both batteries with new ones.  
If the batteries are dead or if you will not be using the remote control for a long  
time, remove the batteries to prevent battery acid from leaking into the battery  
compartment.  
Battery shall not be exposed to excessive heat such as sunshine, fire or the like.  
Replace only with the same type of battery or equivalent.  
When discarding batteries, environmental problems must be considered and local  
rules or laws governing the disposal of these batteries must be strictly followed.  
 
SBX4250KN_IB_V1_R13.indd 11  
2012/6/26 14:21:45  
12  
Sound Bar speaker system placement  
The Sound Bar can be placed freestanding on a table or mounted on a wall. For the best surround  
sound experience, place your subwoofer as shown below.  
Place the subwoofer at least 11.8” (300mm) away from the TV.  
TV  
300mm  
Sound Bar  
Subwoofer  
(Sample Illustration)  
Subwoofer placement  
Placing the unit on a wall  
The Sound Bar requires additional mounting hardware that must be purchased separately.  
1. Place the wall mounting template on the wall and then mark the locations of the screw holes.  
2. Drill the screws (not supplied) into the wall carefully.  
3. Gently hang the Sound Bar onto the screws in the wall.  
We recommend that wall-mounting be carried out by a professional. The stand’s  
“key-holes” are intended for use with #8 (Imperial) or M4 (Metric) pan head screws.  
Make sure that the wall-mounting screws are fixed securely enough so that it meets  
safety standards.  
Allow at least 2” (5 cm) separation in all directions between the Sound Bar and other  
AV equipment (such as your TV or Set-Top Box).  
It is recommended that all cables (AC adapter and Audio cables) be connected to the  
Sound Bar before placing it on the wall.  
(Sample Illustration)  
Wall-mount screwed to the wall  
 
SBX4250KN_IB_V1_R13.indd 12  
2012/6/26 14:21:45  
13  
Sound Bar speaker system connections  
Connecting to a TV using an HDMI® (ARC) cable.  
This feature enables the audio signal of the TV to be sent to the Sound Bar via the HDMI® cable. The  
HDMI® cable is not included and must be purchased separately. Be sure that the connected TV has  
an HDMI® (ARC) compatible terminal. To connect the HDMI® ARC cable:  
1. Connect an HDMI® cable from the HDMI® output jack on the Sound Bar to the HDMI® input  
jack on the TV.  
2. Press the INPUT button to select the HDMI®-ARC mode and the display will be shown  
“ARC”.  
High  
Definition  
TV  
HDMI® IN (ARC)  
not supplied  
(Sample Illustration)  
HDMI® OUT ARC  
connection  
Do not tilt the connector when inserting it into the HDMI® jack, and make sure the  
shapes of the jack and the connector are aligned properly.  
If your TV is not HDMI® (ARC) compliant , connect your Sound Bar to the TV through  
a standard HDMI® connection.  
The optical digital audio cable connections is needed when the HDMI® cable is  
connected to a terminal that is not HDMI® (ARC). (For more information, please  
refer to “Connecting to an audio system” on page 14.)  
Connecting to a compatible device.  
You can output the audio signal from the compatible device (e.g. Blu-ray™ player , DVD player  
etc.) with this Sound Bar and pass the signal through to your TV.  
1. Connect an HDMI® cable from the HDMI® input jack on the Sound Bar to the HDMI® output  
jack on the other device.  
2. Connect an HDMI® cable from the HDMI® output jack on the Sound Bar to the HDMI® input  
jack on the TV.  
3. Press the INPUT button to select the HDMI® mode and the display will be shown “HDMI-1”  
or “HDMI-2”.  
Blu-ray™/  
DVD Player  
HDMI® OUT  
High  
Definition  
TV  
HDMI® IN  
not supplied  
(Sample Illustration)  
HDMI® compatible device connection  
 
SBX4250KN_IB_V1_R13.indd 13  
2012/6/26 14:21:45  
14  
Connecting to an Audio System.  
You can connect your Sound Bar to an audio system to play audio from other devices.  
Connect audio through a digital optical cable  
1. You can connect a optical cable from the OPTICAL input jack on the Sound Bar to the  
OPTICAL output jack on the other device.  
2. Press the INPUT button to select the OPTICAL mode and the display will show “OPT-1” or  
“OPT-2”.  
When your Sound Bar and TV are connected through HDMI® (ARC), an audio  
connection is not required.  
Blu-ray™/  
DVD Player  
Set-Top Box  
not supplied  
OPTICAL OUT  
(Sample Illustration) Digital optical cable connections  
Connect audio through an analog audio cable.  
You can connect an audio cable (not included) from the L/R AUX input jack on the Sound Bar to  
the Audio output jack on the other device.  
1. Press the INPUT button to select the AUX IN mode and the display will show “AUX”.  
Blu-ray™/  
DVD Player  
Set-Top Box  
not supplied  
(Sample Illustration) Analog audio connections  
 
SBX4250KN_IB_V1_R13.indd 14  
2012/6/26 14:21:45  
15  
2. Connect a 3.5mm cable (not included) from the LINE input jack on the Sound Bar to the other  
device.  
3. Press the INPUT button to select the LINE IN mode and the display will show “LINE-IN”.  
Portable music player or  
other Audio Devices  
not supplied  
(Sample Illustration) 3.5mm connection to audio device  
Connecting to a switching power supply (AC Adapter).  
Using a switching power supply (AC Adapter) other than the one supplied with the unit may  
damage the unit.  
Before use, ensure the rated voltage of the switching power supply (AC Adapter)  
matches your local voltage.  
The included switching power supply (AC Adapter) is for use with this unit only. Do  
not use it with other equipment.  
If you are not going to use the unit for an extended period of time, disconnect the  
switching power supply (AC Adapter) from the wall outlet.  
Whenever the switching power supply (AC Adapter) is plugged in to a wall outlet,  
the switching power supply (AC Adapter) will draw some power, even when the unit  
is turned off.  
Sound Bar  
(Sample Illustration)  
Connecting the switching power supply (AC Adapter)  
Subwoofer  
 
SBX4250KN_IB_V1_R13.indd 15  
2012/6/26 14:21:45  
16  
Subwoofer wireless connection  
In order to use the subwoofer, you must pair it with the Sound Bar.  
1. Connect the power cord to a wall outlet.  
2. Turn on the Sound Bar.  
3. Turn the ON/OFF switch on the back of subwoofer to turn on.  
4. The Sound Bar and the subwoofer automatically pair up. The indicator is red when the wireless  
link is activated.  
When the wireless link is deactivated, the Sound Bar will be shown “NO  
SUBWOOFER”. You can press and hold the button on the remote control for 8  
seconds in HDMI®-2 mode. And then, press and hold the WIRELESS LINK button of  
the subwoofer for approximately 5 seconds until the red indicator is flash.  
The Sound Bar will show “PAIRED” when the Sound Bar and the subwoofer pair up.  
Playing back via Bluetooth® enabled devices  
®
1.Press the INPUT button to select Bluetooth mode until the display is shown “BT”.  
2.Once the Sound Bar is detected of your Bluetooth® enable device. Select the “Toshiba Soundbar”  
on your device.  
3.Enter the PIN code.  
PIN code : 0000  
®
4.When this unit successfully paired with your Bluetooth device, appears “CONNECTED”.  
5.Select the desired music and press the PLAY button on your device.  
For details, please refer to the user manual of your Bluetooth® device.  
 
SBX4250KN_IB_V1_R13.indd 16  
2012/6/26 14:21:45  
17  
Troubleshooting  
Problem:  
Solution:  
The unit does not switch on.  
Make sure it is plugged in.  
Press the STANDBY/ON button located on the top of the  
Sound Bar, and check to see if the STANDBY/ON indicator  
turns off.  
Turn the subwoofer power switch to ON.  
No sound from the sound bar  
Press the VOL button of the Sound Bar.  
Ensure the source you have selected is outputting audio. If  
you are using “audio out” from your TV, please ensure your  
TV is configured to output audio (see TV’s menu settings).  
Ensure your audio connections are properly made (check  
that you don’t have any loose connections).  
Ensure you have selected the correct source (input) - the  
display of the Sound Bar will shown the currently-selected  
source (input).  
Press the MUTE button on the remote control to ensure the  
sound bar is not muted.  
No sound from the subwoofer  
Move the subwoofer closer to the Sound Bar.  
Ensure the subwoofer is turned on. Turn the subwoofer  
power switch to ON.  
Press the WIRELESS LINK button on the back of the  
subwoofer to re-link the subwoofer with the Sound Bar.  
Remote control does not work  
properly  
Check the following:  
The batteries are inserted correctly.  
The batteries are fresh.  
The remote control is pointed directly at the remote sensor  
of the unit.  
The remote control is not being used from too far a distance  
from the unit.  
Nothing is obstructing remote sensor (located on front of  
the unit).  
 
SBX4250KN_IB_V1_R13.indd 17  
2012/6/26 14:21:45  
18  
Maintenance  
Servicing  
Please refer to relevant topics in “Troubleshooting & Maintenance” on page 17 & 18 before  
returning the product.  
If this unit becomes inoperative, do not try to correct the problem by yourself. There are no user-  
servicable parts inside. Turn off, unplug the power plug, and please call our helpline to locate an  
Authorized Service Center.  
Cleaning the cabinet  
Never use a solvent, thinner, benzene or alcohol to clean the unit. Do not spray insecticide liquid  
near the unit. Such chemicals may discolor the surface or damage the unit.  
 
SBX4250KN_IB_V1_R13.indd 18  
2012/6/26 14:21:45  
19  
Specifications  
These models comply with the specifications listed below.  
Designs and specifications are subject to change without notice.  
These models may not be compatible with features and/or specifications that may  
be added in the future.  
Main unit:  
Power requirements  
Power output  
DC 27.5V  
3.2A  
75 watts (per channel at 4 ohms, 1 kHz/THD10%)  
Power consumption  
Impedance  
27W  
4
Dimensions  
(width x height x depth)  
37.5x 3.6x 2.2(954 x 92x 58mm)  
Weight  
4.9 lbs (2.2 kg)  
Subwoofer:  
Power requirements  
Power output  
AC 120 60Hz  
150 watts (at 3 ohms, 100Hz/THD10%)  
Power consumption  
Impedance  
34W  
3
Dimensions  
(width x height x depth)  
7.5x 13.9x 13.2(193 x 355 x 336mm)  
Weight  
14.3 lbs (6.5 kg)  
 
SBX4250KN_IB_V1_R13.indd 19  
2012/6/26 14:21:45  
 
SBX4250KN_IB_V1_R13.indd 20  
2012/6/26 14:21:45  

Teledyne Doll 200AU User Manual
Timex Watch 333 095002 User Manual
Toshiba TV DVD Combo MD20P1 User Manual
Tricity Bendix Dishwasher DH 103 User Manual
Tricity Bendix Freezer TBUL 140 User Manual
Unitech Stereo System PA966 User Manual
Universal Remote Control Universal Remote TRC 1280 User Manual
Vermont Casting Gas Grill VCS3507 User Manual
Vision Fitness Treadmill T9500HRT User Manual
Vizio Car Satellite TV System VO370M User Manual