Walker Indoor Furnishings V42Y79B User Manual

Item #: V42Y79

Assembly Instructions

For our most current instructions, to request missing, lost or broken parts, or for any other Customer

Service issues, please visit our website at www.walkeredison.com or call us at 877-207-5906.

Revised 11/2010

Hardware List

Carefully lay glass (1) upside down on a soft surface. Screw long rods (A) and short rods (B) into the appropriate

metal plates of glass (1).

Slide cylinders (4) onto long rods (A). Slide decorative rings (D) onto long rods (A) and snap onto cylinders (4).

Carefully slide glass (2) into place using long rods (A) as guides. Slide decorative rings (D) onto long rods (A).

Slide cylinders (3) onto long rods (A). Cylinders (3) will fit snuggly into the decorative rings placed in the previous

step. Slide decorative rings (D) onto long rods (A) and snap onto cylinders (3).

Carefully slide glass (2) into place using long rods (A) as guides. Slide decorative rings (D) onto long rods (A).

Screw cylinders (5) onto long rods (A). Cylinders (5) will fit snuggly into the decorative rings placed in the

previous step.

Insert caps (E) into cylinders (5). Note that caps (E) may be pre-inserted into cylinders (5).

To attach cable management system (6) to the stand, place appropriate holes of cable management system (6)

over short rods (B). Screw cap nuts (C) onto short rods (B) and tighten with wrench (F).